1P1060S
1.2CFM at 90 PSI1 gal · 56 dB published
Small 1-gallon portable model; 29 lb and the lowest published noise figure in this group. Its 1.2 CFM at 90 PSI makes demand and firing rate central to selection.
Review this compressor →THE COMPRESSOR CATALOGFind the pump
Find the pump
behind the tank.
Review actual delivery points and operating limits. Published noise figures may use different test conditions.
2010A
2.2CFM at 90 PSI2 gal · 60 dB published
Two-gallon aluminum tank and the same 2.2 CFM at 90 PSI as the larger 8010. Choose by carrying weight, burst reserve and floor space rather than assuming a larger motor.
Review this compressor →8010
2.2CFM at 90 PSI8 gal · 60 dB published
Eight-gallon wheeled steel tank offers more stored air than the 2010A, while both publish 2.2 CFM at 90 PSI. More tank capacity does not increase refill output.
Review this compressor →10020C
5.3CFM at 90 PSI10 gal · 70 dB published
Ten-gallon upright wheeled compressor with 5.3 CFM at 90 PSI. It matches the standard 20020's output while occupying less space and carrying less tank reserve.
Review this compressor →20020
5.3CFM at 90 PSI20 gal · 70 dB published
Twenty-gallon reservoir stores twice as much tank volume as the 10020C, but its published 90 PSI flow is identical. A larger tank extends a burst, not sustained pump capacity.
Review this compressor →20020CR
5CFM at 90 PSI20 gal · 77 dB published
The continuous-run version trades a higher published noise figure for a 100% duty rating and defined long-duration limits. Its 90 PSI output is 5.0 CFM, slightly below the standard 20020's 5.3 CFM.
Review this compressor →MAC100Q
0.7CFM at 90 PSI1 gal · 58 dB published
One-gallon Quiet Series model with the smallest 90 PSI flow here. A light, low-noise carrying option for limited nailer/stapler demand, subject to the manual's application restriction.
Application restrictionReview this compressor →MAC210Q
2CFM at 90 PSI2 gal · 60 dB published
Two-gallon Quiet Series step-up with 2.0 CFM at 90 PSI. More output than MAC100Q but still restricted to properly rated nailers/staplers and 50% hourly duty.
Application restrictionReview this compressor →MAC320Q
2.6CFM at 90 PSI3 gal · 60 dB published
Three-gallon Quiet Series model with two couplers and 2.6 CFM at 90 PSI. It offers more reserve/output than the smaller Quiet models but retains their use restriction.
Application restrictionReview this compressor →MAC700
3.3CFM at 90 PSI2.6 gal · 80 dB published
Compact 2.6-gallon oil-lubricated Big Bore model with 3.3 CFM at 90 PSI. More flow than MAC320Q with a higher published noise figure and oil maintenance.
Review this compressor →MAC2400
4.2CFM at 90 PSI4.2 gal · 79 dB published
Twin-tank oil-lubricated model with 4.2 CFM at 90 PSI and two couplers. Its 77 lb weight is a substantial portability consideration.
Review this compressor →MAC5200
6.5CFM at 90 PSI5.2 gal · Not confirmed
Highest 90 PSI flow in this 12-model group at 6.5 CFM, with wheels and a folding handle. The manual still limits pumping time to half of each hour.
Review this compressor →