ToolSpecLabCHECK FIRST. CHOOSE BETTER.INDEPENDENT TOOL CHECKS
Home›Tools›2135QXPA
Ingersoll Rand

2135QXPA
air requirements.

A impact wrench specification profile. Some specifications need confirmation before a complete airflow screen is possible.

Keep the consumption figures separate.

Category
Impact Wrench
At-load consumption
Not confirmed
Average consumption
5 CFM
Average basis
Not stated in the captured source
Free-speed consumption
Not confirmed
Confirmed operating / rating pressure
90 PSI
Minimum hose inside diameter
0.38 in
Air inlet nominal size
0.25 in
Thread standard
Not confirmed
Weight
4 lb
CHECK THE PAIRING

Your tool. Your working schedule.

Example schedule: 10 trigger seconds each minute. Change it to reflect your job.

Your setup

Session length is recorded for checking the manual. It does not predict a safe operating time.

Add confirmed missing specifications

Use figures from your exact model’s label or manual. These entries remain user supplied and are not added to our catalog.

California Air Tools 10020C

More source data needed

The available specifications do not support a complete basic airflow screen. Missing information is shown rather than estimated.

Your average air demandNot established10 seconds of trigger time per minute · 1 tool · 30-minute session
Published compressor delivery5.30 CFMAt 90.0 PSI

  1. Manufacturer application limits

    For reference

    No category restriction is recorded in this dataset. Check the model manual for your application.

  2. Working pressure

    Within this criterion

    The tool’s 90 PSI requirement is within the compressor’s 125 PSI pressure ceiling. This does not establish pressure delivered through the regulator, hose and fittings.

  3. Air demand versus published delivery

    Data missing

    Confirmed at-load airflow is missing. The source lists 5 CFM average; these are not substituted for at-load consumption. The entered trigger schedule cannot be calculated from an unspecified average.

  4. Airflow during a trigger pull

    Data missing

    At-load flow and a same-pressure compressor rating are needed to screen demand during a trigger pull.

  5. Pump duty

    Data missing

    The recorded duty share is 70%, but demand data are insufficient to screen pump load. 70% running / 30% stopped across a standard workday; additional continuous-use limits apply.

  6. Session duration

    Check the conditions

    30 minutes is recorded for your planned session. Model-specific duration limits, cooling breaks and actual cycling are not automatically validated. This field does not change the airflow calculation.

  7. Hose and connections

    Check the conditions

    The tool specifies a minimum 0.38-inch hose inside diameter; its recorded air inlet is 0.25 inch. Confirm thread type, coupler profile, hose length and available flow separately; matching nominal sizes alone is not a connection check.

Evidence still needed

  • Confirmed at-load tool airflow

Specification screening only. Actual pressure at the tool, hose losses, pump cycling and installation conditions are not established by an average-flow calculation.

2135QXPA manufacturer specification table ↗ · Official US product specifications ↗

What this model page can establish

The recorded impact wrench specifications are a starting point for comparing air supply. Select the compressor and working schedule to see each check separately. If you add missing specifications from your manual, the result labels them as user supplied.

Hose inside diameter, inlet thread and quick-coupler profile are separate properties. A matching nominal size is not proof that two fittings connect or can carry the required flow.

Manufacturer sources

Checked 25 October 2026. Specifications can change; verify the exact model and market before purchase.

Look up this model at the retailer.

This opens Amazon search results for Ingersoll Rand 2135QXPA, not a verified product listing. Check the exact model, market version and accessories. No live price or stock is shown.

As an Amazon Associate I earn from qualifying purchases.

Search this model on Amazon ↗